Government

Advantages of using our products for all your Government needs:

Septic Tanks

  • Tanks range in size  from 1220L to 4500L capacity with extensions available for most sizes.
  • Suitable for the reception and treatment of sewage & silage for households. 
  • Can also be used in an irrigation recycling system. 
  • Available with various lid styles to suit. 
  • To download Product Brochure [Click Here]


Interlocking/Butt Pipes

  • Designed with a ‘male’ & ‘female’ end for ease of functionality.
  • Used for irrigation needs; supply drainage, sumps & crossings. 
  • Available with pipe sealing bands where  pipelines need to be flexible.
  • Manufactured to AS/NZS 4058:2007 Pre-cast concrete pipes (pressure & non-pressure) standards.
  • To download Product Brochure [Click Here] 


Spigot Pipe

  • Typically used in conjunction with a pipe headwall and rubber ring joint pipe. 
  • Used for irrigation needs; supply drainage, sumps & crossings. 
  • Available in strength classes made to suit you irrigation needs. 
  • Manufactured to AS/NZS 4058:2007 Pre-cast concrete pipes (pressure & non-pressure) standards.
  • To download Product Brochure [Click Here]

Rubber Ring Joint Pipe

  • Quality reinforced flanged pipe for  irrigation.
  • Rubber ring coupling gives flexibility to eliminate joint cracks.
  • Allows for ground movement after Installation. 
  • Available in strength classes made to suit you irrigation needs. 
  • Manufactured to AS/NZS 4058:2007 Pre-cast concrete pipes (pressure & non-pressure) standards.
  • To download Product Brochure [Click Here]


Pipe Headwall

  • Wide range of sizes are manufactured to fit from 150mm to 1800mm inside diameter pipes.
  • Can be used to eradicate erosion in a lift pump situation.
  • Frequently used in access crossings, subdivisions and road works.
  • Also available in full neoprene to give a  water tight seal able to take a steel door.
  • Available with step for board control allows overflow to maintain you channel water level. 
  • New design has a self cleaning groove to remove debris from door slide.
  • Easy pipe installation with either a rubber ring or emer seal eliminating the need for any grouting. 
  • Multi-cell headwalls available to order. 
  • Quick lift & A-Frame systems available to suit.
  • To download Product Brochure [Click Here]


Sloped Headwall

  • Minimises hazard on shoulder of roads without compromising the batter of the soil.
  • Generally used by Roads & Maritime Services and Shire Councils across Australia. 
  • Sizes range to suit 300mm to 600mm inside diameter pipes. 
  • To download Product Brochure [Click Here]


Trafficable Headwall

  • Minimises hazard on shoulder of roads without compromising the batter of the soil.
  • Generally used by Roads & Maritime Services and Shire Councils across Australia. 
  • Sizes range to suit 300mm to 525mm inside diameter pipes.
  • To download Product Brochure [Click Here] 


Stormwater Inlet Pits

  • Suitable for junction pits, grated pits and kerb inlet pits.
  • Knockout sections on all 4 sides provide easy pipe connection.
  • Can be used as a diversion irrigation system. 
  • Able to have customized doors fitted to each unit. 
  • Stackable extensions available for the desired height. 
  • Multiple lid options including grated, surcharged and plain. 
  • Lids available in various load class ratings. 
  • Additional Lids available to those listed.
  • To download Product Brochure [Click Here]


Reinforced Concrete Box Culverts

  • Box Culverts are used in irrigation, drainage and bridge works for  domestic and government projects.
  • This product allows for a larger more natural water flow reducing erosion and can be laid with no cover needed. 
  • Ability to be inverted for ease of cleaning and maintenance. 
  • Designed to take extreme loads of pressure and any highway vehicle axle load permitted by the Roads & Maritime Services. 
  • Available in Over 120 different sizes.
  • Manufactured to AS 1597.1-2010 & AS 1597.2 2013
  • Dimensions may vary, please contact B.Altin & Co for confirmation.
  • To download Product Brochure [Click Here]

Base Plates/Link Slabs

  • Base Plates/Link Slabs available for most sizes of Box Culverts.
  • Base plates prevent undesirable sinking
  • Remove the need for footings or to pour on site with pre-cast ease. 
  • Additional sizes may be available.
  • To download Product Brochure [Click Here]


Box Culvert Headwalls

  • Can be used to keep soil back to prevent erosion.
  • Headwalls to suit 30cm x 15cm x 2.5m Box Culverts to 4.2m x 4.2m x 1.2m Box Culverts
  • No need for on site frame work.


Sewer Access Components

  • Our sewer Components are made with high strength compressed concrete to cope with corrosive environments. 
  • Water tight maintenance holes.
  • Components fit together easily to create a complete system. 
  • Pre-configured base chambers are made to suit with either 45 or 90 degree inlet holes. 
  • Concrete plugs provided for a tight seal when inlet holes not in use.
  • Concrete and gatic lids available to suit. 
  • Bostik seal is used between joins for a water tight seal. 
  • Components have the option to include steps for ease of access. 
  • To download Product Brochure [Click Here]


Multi-cell Headwalls
  • Ability to install rows of pipes/box culverts parallel maintaining a low profile.
  • Helps to unify multi-cell structures together.
  • Can be used to keep soil back to prevent erosion.
  • Special requirements where a higher then usual headwall is necessary can be manufactured to order.


Customized Manufacturing

  • Variations to products made to order.
  • Able to accommodate to suit your individual concrete needs. 
  • For more information contact our office and speak to our staff on 02 6962 1184


DELIVERY AUSTRALIA WIDE!